IECS took on the extremely challenging task of precasting 1.4km of elevated guideway for the Davenport Diamond Grade Separation project. This unique guideway was designed around heavy rail loading increasing reinforcing and limiting space within the formwork. Each segment had a weight of roughly 65,000kg and was delivered with escorts to Toronto. Once on site three segments were post tensioned to create one large span with an average length of 21.5m and weight of nearly 200,000kg.
Product:
Specialty Precast
Location:
Toronto, Ontario
Scope:
170 Match Cast Box Girder Segments 4275mm x 2150 x 7068
Install Date:
02/09/2022
Owner:
Metrolinx/Infrastructure Ontario
Engineer:
IBT
Contractor:
Graham Construction
Related Featured Projects
Trent-Severn Waterway Lock 1 at Dam 1 Reconstruction
Project Type:
Specialty Precast
IECS manufactured and delivered 80 Post Tensioned Precast Deck Slabs to the Reconstruction of Dam 1 in Trenton Ontario. Each slab had a weight of 17,000kg spanning nearly 10 meters over each of the 16 newly built sluice gates and were aesthetically enhanced with a broom finish and a 75mm radius on all exterior edges. […]
Read More… from Trent-Severn Waterway Lock 1 at Dam 1 Reconstruction
Replacement of Culvert 631
Project Types:
Precast Box Culverts, Precast Headwalls, Specialty Precast
IECS custom built this Precast Open Bottom Culvert (12 spans) complete with Precast Footings, Wingwalls and Headerwalls. Each culvert span weighed 27,000Kg. […]
Coast Subdivision Stilling Basin
Project Types:
Precast Headwalls, Specialty Precast
This stilling basin structure posed a very unique challenge to Omega Contractors, the structure was called to be cast-in- place, it was right on the shore of Lake Huron and there was poor access to the location. IECS Group was able to give Omega a pre-cast solution that did not involve pouring concrete on the […]
